| Part Number: | 20-0484-08 |
| Size: | -8AN |
| Color: | Black |
| Brand: | Radium Engineering |
- This kit is typically used for standard-fill systems with direct fill or remote fill necks
- It includes an air filter
- 1/2″ fuel vent hose,
- Requires a 8AN male vent fitting
- From the cell, the hose must first run upwards allowing any fuel captured in the vent line to drain back down into the cell.ย
- After ascending vertically, the line should briefly route towards the front of the vehicle to prevent fuel from sloshing out.ย
- Vertical loops should be added to act as a “make-shift”ย expansion chamber and allow air to escape and any fuel to drop to the bottom of the loops.ย
- Depending on the application, the overall vertical height of the vent hose should be at least 12″.ย
- For remote fuel fill applications, the vertical loops must be higher than the fill point.
- The vent hose should terminate outside of the cabin and away from the exhaust system.
- The vent hose should terminate below and behind the fuel cell.
- Utilizing an expansion chamber that is larger than the vent hose diameter will further aid in preventing liquid fuel from escapingย
Due to the manufacturer’s price control policy, this item may be excluded from promotions and discounts
WARNING: This product may contain chemicals known to the State of California to cause cancer or birth defects. www.P65Warnings.ca.gov.












Reviews
There are no reviews yet.