ACL K-Series +.025mm Rod Bearings Part Number: 4B1972H-.025

K Series Parts has used ACL rod bearings in almost every k-series motor we have built. We highly recommend them for any K20 and K24 motor build!

An ACL standard bearing is equivalent to a Honda green bearing but has an extra thickness of .025.

These bearings work with the following engine blocks: K20A2,K24A

ACL Description

ACL Race Series Connecting Rod Bearings: The unique combination of design, metallurgy and engineering come together to deliver what drivers expect from high performance Trimetal engine bearings.

Designed to withstand higher RPM conditions, ACL Race Series Connecting Rod Bearings are available for many of the popular 4, 6 & 8 cylinder applications.

Features

• High strength overlay plate* with reduced thickness for improved fatigue properties
• Hardened steel backs* on all rod bearings to improve the support of the bearing lining and assist with bearing retention in the housing.
• Increased crush* for improved bearing retention
• Elimination of flash plating* on the back of the bearings to improve heat transfer through the bearings and to maximize the grip between the bearings and its housing.
• Increased eccentricity* to compensate for bore distortion at high rpm and to assist in the formation of hydrodynamic oil films.
• Tight consistent wall tolerances* to help you maintain consistent clearances.
• Enlarged ID chamfers* on bearing edges where required to accommodate large fillet radius on performance crankshafts.

WARNING: This product may contain chemicals known to the State of California to cause cancer or birth defects. www.P65Warnings.ca.gov.